tlhk4400l www.vishay.com vishay semiconductors rev. 1.2, 06-jun-14 1 document number: 84180 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high intensity led in ? 3 mm tinted diffused package description this device has been designed to meet the increasing demand for alingap technol ogy general in dicating and lighting purposes. it is housed in a 3 mm diffused plastic package. the wide viewing angle of these device s provides a high brightness across a large field of view. all packing units are categoriz ed in luminous intensity groups. that allows users to assemble leds with uniform appearance. product group and package data ? product group: led ?package: 3 mm ? product series: standard ? angle of half intensity: 30 features ? alingap technology ? standard ? 3 mm (t-1) package ? small mechanical tolerances ? suitable for dc and high peak current ? wide viewing angle ? very high intensity ? luminous intensity categorized ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 applications ? status lights ? off/on indicator ? background illumination ? readout lights ? maintenance lights ?legend light ? ? ? ? note ? driving the led in reverse direction is suitable for a short term application 19222 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. tlhk4400l red 16 70 - 10 626 630 639 10 - 1.9 2.6 20 alingap on gaas TLHK4400L-PSZ red 16 70 - 10 626 630 639 10 - 1.9 2.6 20 alingap on gaas absolute maximum ratings (t amb = 25 c, unless otherwise specified) ? tlhk4400l parameter test condition symbol value unit reverse voltage (1) v r 5v dc forward current t amb ? 60 c i f 30 ma surge forward current t p ? 10 s i fsm 0.1 a power dissi pation p v 80 mw junction temperature t j 100 c operating temperature range t amb -40 to +100 c storage temperature range t stg -55 to +100 c soldering temperature t ? 5 s, 2 mm from body t sd 260 c thermal resistance junction/ambient r thja 400 k/w
tlhk4400l www.vishay.com vishay semiconductors rev. 1.2, 06-jun-14 2 document number: 84180 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. ? the above type numbers repres ent the order groups which include only a few brightness groups. only one group will be shipped on each reel (there will be no mixing of two groups on each reel). ? in order to ensure availability, single brightness groups will not be orderable. ? in a similar manner for colors where wavelength groups are measured and binned, single wave length groups wi ll be shipped on any one reel. ? in order to ensure availability, single wavelength groups will not be orderable. note ? wavelengths are tested at a current pulse duration of 25 ms. ? ? ? ? ? ? ? ? ? ? ? ? ? ? typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - relative luminous intens ity vs. angular displacement optical and electrical characteristics (t amb = 25 c, unless otherwise specified) tlhk4400l, red parameter test condition symbol min. typ. max. unit luminous intensity i f = 10 ma i v 16 70 - mcd dominant wavelength i f = 10 ma ? d 626 630 639 nm peak wavelength i f = 10 ma ? p - 643 - nm angle of half intensity i f = 10 ma ? - 30- deg forward voltage i f = 20 ma v f -1.92.6v reverse current v r = 5 v i r - - 10 a junction capacitance v r = 0 v, f = 1 mhz c j -15-pf luminous intensity classification group light intensity (mcd) standard min. max. s1632 t2550 u4080 v 63 125 w 100 200 x 130 260 y 180 360 z 240 480 aa 320 640 bb 430 860 color classification group red dom. wavelength (nm) min. max. 1 626 629 2 628 631 3 630 633 4 632 635 5 634 637 6 636 639 0 10 20 30 40 60 95 10894 50 i - forward current (ma) f t amb - ambient temperature (c) 100 80 60 40 20 0 0.4 0.2 0 0.2 0.4 0.6 95 10042 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 i v rel - relative luminous intensity
tlhk4400l www.vishay.com vishay semiconductors rev. 1.2, 06-jun-14 3 document number: 84180 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - relative intensity vs. wavelength fig. 4 - forward current vs. forward voltage fig. 5 - relative luminous intensity vs. forward current fig. 6 - relative luminous in tensity vs. ambient temperature fig. 7 - relative luminous intens ity vs. forward current/duty cycle 0.0 0.2 0.4 0.6 0.8 1.0 1.2 600 620 640 660 680 700 - wavelength (nm) 96 12075 i rel - relative intensity 1 10 100 1 1.5 2 2.5 3 v f - forward voltage (v) 95 10878 i f - forward current (ma) 0.01 0.1 1 10 1 10 100 i f - forward current (ma) 9611588 i v rel - relative luminous intensity 0 0 0.4 0.8 1.2 1.6 96 12077 20 40 60 80 100 i - relative luminous intensity v rel t amb - ambient temperature (c) i f = 10 ma 0.0 0.4 0.8 1.2 1.6 2.0 110 96 11589 i spec - specific luminous intensity t p /t i f (ma) 50 520 2 0.5 0.2 0.1 0.05 0.02 1
tlhk4400l www.vishay.com vishay semiconductors rev. 1.2, 06-jun-14 4 document number: 84180 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters fig. 8 - tape dimens ions ? 3 mm devices explanation: z - ammopack 20236 0.3 0.2 2.54 + 0.6 - 0.1 12.7 0.2 5.08 0.7 18 + 1 - 0.5 9 0.5 measure limit over 20 index-holes: 1 12 0.3 0.9 max. 6.35 0.7 ? 4 0.2 12.7 1 1 ?h? 2 tape dimensions ? for ? 3 mm TLHK4400L-PSZ option dimension h 0.5 mm ps 28.5
tlhk4400l www.vishay.com vishay semiconductors rev. 1.2, 06-jun-14 5 document number: 84180 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ammopack fig. 9 - tape direction note ? the new nomenclature for ammopack is asz only, without suffix for the led or ientation. the carton box has to be turned to the desired position: + for anode first, or - for cathode first. as12z and as21z are still valid for already existing types, but not fo r new design. packing method bulk ammopack (z) 1 x 5000 pcs 5 x 2000 pcs tape feed direction diodes: cathode before anode transistors: collector before emitter label tape feed direction 94 8667-2 diodes: anode before cathode transistors: emitter before collector
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
